BRAND NEW set of FRONT and REAR 4-Piston Brembo Calipers to fit VF Commodores (Sedan, Wagon and Ute models). This kit also includes a complete set of front and rear Genuine BREMBO pads, and brake pad retaining kits. For better braking performance, this is the premium upgrade kit available for your car.
- Set of FRONT 4-Piston RED Genuine Brembo Calipers
- Set of REAR 4-Piston RED Genuine Brembo Calipers
- Set of FRONT Genuine Brembo High-Performance Brake Pads
- Set of REAR Genuine Brembo High-Performance Brake Pads
- Set of FRONT Brake Pad Retainer Pin Kit
- Set of REAR Brake Pad Retainer Pin Kit
You will need to supply your own disc rotors & bolts (slightly longer bolts are required for the front and rear brembos - these can be purchased from a Holden Dealership. If you wish to fit these brakes to VE Models: When fitting the front calipers, the bolt holes on the front knuckles needs to be expanded from 12mm to 14mm to clear the thicker thread bolts. This is not required for VF Models.
Brake Upgrade Fitment Information:
The disc rotors for these brake calipers are what come fitted to VE & VF Commodore Redline edition vehicles with front brembo calipers, Size: 355mm x 32mm.
The disc rotors required for these brake calipers are what come fitted to VF Redline models with Brembo Rear Calipers, Size: 360mm.
As these kits are specific for the VF Commodore, you are NOT required to swap the bleeder positions on the calipers - they are ready to bolt on. To fit the rear calipers, you are required to trim the rear dust shields about 20mm for clearance. Please make sure your wheels are large enough to fit & clear these calipers. PLEASE NOTE: These do NOT include fitment instructions.