Holden VB-VP to VT-VZ 296mm FRONT Brake Upgrade Hubs, Calipers, Brake Lines & Master Cylinder Adaptor KIT - No Brake Pads or Rotors

Brand new brake upgrade kit to convert early model Commodores from the standard single-piston calipers to the much larger twin-piston brakes & 296mm rotors found on VT-VZ Commodores. Also included in our kit is the hardware required to adapt the larger VT-VZ brake booster and master cylinder onto Holden VB-VP Commodores. This includes a bracket to mount the VT-VZ booster and master, as well as line adaptors to accept your factory lines .

Please refer to the main photo, as it shows everything supplied. 
Please see the links below to read up on each component. 

Protex calipers are made from premium rubber components, hardened pistons and quality castings for maximum life.

To Suit: Holden VB, VC, VH, VK, VL, VN and VP Commodores. 

Our kit includes the following:

2 x NEW Protex VT-VZ Commodore two-piston front brake calipers in silver finish (1x LH Front, 1x RH Front).
2 x Planet Parts Conversion Hubs.
2 x Planet Parts Front Braided Brake Conversion Lines - ADR Compliant, tested to 3,000PSI.
1 x Planet Parts Holden VB-VS Commodore to VT Brake Booster and Master Cylinder Bracket Adaptor.
1 x Planet Parts Holden VB-VP Commodore to VT Master Brake Cylinder Booster Line Adaptors SET OF 3.

Please note: Additional parts are still required to complete the upgrade.

You will need to supply:
VT-VZ Commodore front brake pads,
VT-VZ Commodore 296mm x 28mm front rotors,
VB-VP Front Wheel bearings,
Holden VT-VZ Brake Booster and Master Cylinder.

Brake Discs Information:
The front discs required are the brake discs that come fitted to VT, VX, VY and VZ models, Size: 296mm x 28mm.

Minimum 15" wheels required.