BARRA PATROL BUNDLE KIT: Nissan ZD30 Patrol to Ford Falcon BARRA Engine Conversion Mounts, Brackets & ZF 6HP26 Adaptor

Our Barra Patrol Bundle Kit is the best value conversion kit on the market. It comes with almost everything you need to mount a BARRA engine & Falcon ZF Transmission into a Nissan Patrol ZD30 Chassis.

What our kit includes:

ZF 6HP26 to Nissan Patrol Transfer Case Adaptor KIT suit GQ GU ZD30 Crossmember & Driveshafts

1x Billet 6061 Aluminium Adaptor Plate

1x Pair of Crossmember mounts with brand new SuperPro polyurethane bushes pre-installed

1x Brand New Input Shaft Adaptor

1x All high-tensile bolts, nuts & washers required

BOLT-IN ENGINE MOUNTS for Nissan ZD30 Patrol to Ford Falcon BARRA Engine Conversion BRACKETS (inc. XR6 Turbo) GQ GU

1x Pair of Conversion Engine Mount Brackets

1x All high-tensile bolts & washers required

Nissan GQ GU Patrol to Ford Falcon BARRA Engine Accesories/Brackets KIT (inc. XR6 Turbo)

1x Alternator front & rear relocation brackets (to place the alternator higher up than the factory position to protect it from water/sand/mud)

1x Power Steering Pump front bracket

1x Power Steering Pump spacer plate

1x Power Steering Pump brace/support bracket

1x Accelerator pedal bracket/adaptor (allows you to fit BA-FG drive-by-wire accelerator pedal)

1x Power Steering Reservoir Bracket (Designed to suit the ZD30 remote reservoir)

1x All high-tensile bolts and nyloc nuts & washers required

INFORMATION ON: ZF 6HP26 to Nissan Patrol Transfer Case Adaptor KIT suit GQ GU ZD30 Crossmember & Driveshafts:

Planet Parts’ Transmission Adaptor Conversion kit allows you to install a Ford Falcon/Territory ZF 6HP26 2WD transmission into a Nissan Patrol Transfer Case.

This adaptor is commonly used in BARRA Patrol conversions as you can use a complete BF/FG/FGX 6-Cyl Engine and Transmission into a Patrol conversion.

It is recommended to use a Manual ZD30 Crossmember & Auto Driveshaft as it eliminates the need for a custom driveshaft length. This adaptor will suit all Nissan Patrol Transfer Cases.

This adaptor is designed to work with our bolt-in BARRA Patrol engine mounts available here.

The large adaptor plate is manufactured from billet 6061 aluminium and machine polished. Our crossmembers mounts are powder-coated black and are supplied with SuperPro polyurethane bushes. The input shaft is manufactured from billet 40CR steel and then heat-treated, which we have found to be more than enough to handle applications up to 600kw. However for those chasing more power, we will have a shaft for high-HP applications available shortly.

Installation notes:

Will NOT suit ZF6 Transmissions built in China. Will only suit the ZF models built in Germany.

Can be used in GQ & GU Patrol applications.

Can be fitted to Auto ZD Crossmembers, however you'll have a tighter diff-to-sump clearance.

You will need to tap/thread the mounting holes on the ZF transmission for it to mount up to our adaptor plate (M10 x 1.5).

Will NOT suit ZF6 AWD Transmissions

INFORMATION ON: BOLT-IN ENGINE MOUNTS for Nissan ZD30 Patrol to Ford Falcon BARRA Engine Conversion BRACKETS (inc. XR6 Turbo) GQ GU

Planet Parts’ Barra BOLT-IN engine mount brackets allows you to install a Ford Falcon BARRA 4.0L Engine (Turbo or N/A) into Nissan Patrol ZD30 Chassis.

All our engine mounts come in a black powder-coated finish to ensure they won’t rust once installed.

Please note: Additional parts are still required to complete the conversion. This kit is supplied with the parts required to bolt-on the motor only. Additional parts will be required.

Installation notes:

Rubber engine mounts are not included. You will need to use a Nissan Patrol ZD30 Engine Mount for the LHS bracket and an Nissan R33 Skyline (2.5L) engine mount for the RHS bracket.

If you are looking to run the Ford Falcon ZF 6-Speed transmission, please click here to view our transmission adaptor kit.

If you are looking to run the Patrol 5-Speed Manual Gearbox, you will need to purchase a bellhousing adaptor. Unfortunately we don't currently stock the bellhousing adaptors, but they are readily available from other parts suppliers.

INFORMATION ON: Nissan GQ GU Patrol to Ford Falcon BARRA Engine Accesories/Brackets KIT (inc. XR6 Turbo)

All components come in a black powder-coated finish to ensure they won’t rust once installed.

Please note: Wiring kit is not included. This kit is supplied with the parts required to fit the motor only. Additional parts will be required.

Installation notes:

This kit is designed to work with the ZD30 remote Power Steering Pump Reservoir. You will need to supply this part yourself. A longer belt is also required.

The Accelerator pedal bracket/adaptor is height-adjustable, so you are able to position the accelerator pedal to your preferred position.